Product
|
Description
|
|
EDS-Plus
Bundle
Schematics & Printed Circuits
|
This is a fully operational EDA design system which
produces manufacturable outputs.
This bundle includes :
- Advanced Schematic Capture module
- PCB-ST Layout module
- Gerber Translator Module
- Robust set of Library symbols and footprints
- A users manual in PDF format.
The EDS software running in the
LITE Mode has net, pin and board size limitations govened by
how effectively you utilize the available memory allocated while
in Lite mode. |
Get Design
Software
|
Get QuickStart
Tutorial
|
SimPlus
Bundle
(XP & Vista only)
|
This is a fully operational EDA design system which
allows you to create and simulate circuits.
This bundle includes :
- Advanced Schematic Capture module
- 3Spice Simulator module
- SPICE models and a robust set of schematic library symbols
- Users manuals in PDF format.
- "QuickStart To Simulations" guide in
PDF format
The Simplus software running in
the LITE Mode is limited to simulating small and simple circuits
with nets totalling less than approximately 22 nets over the
entire project. |
|
3SPICE
(XP & Vista only)
|
Fully functional Circuit Simulator based on industry
standard Berkeley SPICE3. It is the same simulator found in
the SimPlus Bundle above.
The 3Spice software running in
the LITE Mode is limited to simulating small and simple circuits
with nets totalling less than approximately 22 nets over the
entire project. You can also use it with the EDS-Lite above
|
|
Trailblazer
Demo Only
|
This is a high performance multilayer (up to 16
layers) autorouting engine designed to tackle the very difficult
designs of todays applications. A number of sample designs are
included ranging from the simple to the complex allowing you to
evaluate Trailblazer's performance. You can even feed it your
own designs from either the Lite or Pro versions of the PCB-ST. |
|
Tracker
Demo Only
|
This is a high performance dual layer (up
to 2 signal) autorouting engine designed to tackle the very difficult
designs of todays applications. A number of sample designs are
included ranging from the very simple to the complex allowing
you to evaluate McCAD Tracker's performance. You can even feed
it your own designs from either the Lite or Pro versions of the
PCB-ST. |
|