Product
|
Description
|
|
EDS-1Plus
Bundle
Schematics & Printed Circuits
|
This is a fully operational EDA design system which
produces manufacturable outputs.
This bundle includes :
- Advanced Schematic Capture module
- PCB-ST Layout module
- Gerber Translator Module
- Robust set of Library symbols and footprints
- A users manual in PDF format.
The EDS software running in the LITE Mode has
net, pin and board size limitations govened by efficacy of your
design within the memory allocated while in Lite mode. |
|
SimPlus
Bundle
|
This is a fully operational EDA design
system which allows you to create and simulate circuits.
This bundle includes :
- Advanced Schematic Capture module
- 3Spice Simulator module
- SPICE models and a robust set of schematic library symbols
- Users manuals in PDF format.
- "QuickStart To Simulations" guide in
PDF format
The Simplus software running in the LITE Mode
is limited to simulating small and simple circuits with nets
totalling less than approximately 22 nets over the entire project. |
|
3SPICE
|
Fully functional Circuit Simulator based on
industry standard Berkeley SPICE3. It is the same simulator
found in the Simplus Bundle above.
The 3Spice software running in
the LITE Mode is limited to simulating small and simple circuits
with nets totalling less than approximately 22 nets over the
entire project. You can also use it with the EDS-Lite above |
|
Trailblazer
|
This is a high performance multilayer
(up to 16 layers) autorouting engine designed to tackle the very
difficult designs of todays applications. A number of sample designs
are included ranging from the simple to the complex allowing you
to evaluate Trailblazer's performance. You can even feed it your
own designs from either the Lite or Pro versions of the PCB-ST. |
|
Tracker
|
This is a high performance dual
layer (up to 2 signal) autorouting engine designed to tackle the
difficult designs of todays world. A number of sample designs
are included ranging from the very simple to the complex, allowing
you to evaluate Trailblazer's performance. And yes you can even
feed it your own designs from either the Lite or Pro versions
of the PCB-ST. |
|