McCAD SimPlus Updates

 

SimPlus Bundle Version Series 5.0xx/3.1.x

 

Version 5.206/3.1.5(Complete)

Requires Mac OS X thru 10.6x

This is the SchematicsPlus & 3SPICE Bundle Installation which makes up the SimPlus system. The demos and examples are available below.

Use this update ONLY with SchPlus 5.0.12 and later. If you have older version then that re-install a complete archive of the latest version.

3SPICE Module at this time is not compatible with OSX 10.7. Rosetta is required as part of the OS.

  

[ 17,672,398 bytes]

Installation for SimPlus

11/2/2010

 

 

SPICE Models Archive

Models from EDN Collection

An assortment of popular devices

  [ 996,802 bytes]

EDN_MODELS

2/5/2010

 

Simplus QuickStart Tutorial Examples

These set of tutorial examples will make bring you up to speed very quickly as a simulation expert.

[ 3,155,849 bytes]
Installation for
Simplus Tutorial
7/25/2006

 

 3SPICE

Demos & Examples

This archive contains the demos and examples which are part of the complete SimPlus system. It is a large archive.

  [ 23,077,597 bytes]

Installation for Demos & Examples

3/1/2007

User Update Notice

Please be sure to review the requirements on the previous page before you download and replace your existing versions. These downloads will not work unless you have been licensed to run them. In some cases you will have to have your current license upgraded. If you are not sure about your license status you should first contact VAMP Inc. at 1-323-466-5533 during normal business hours or send an E-mail inquiry.


PLEASE NOTE:

The McCAD update files below are large documents. Should you have problems in executing any downloaded update file, first check the size of the document you downloaded. It should match that shown in brackets. If the byte count does not match then the download was not complete and you will have to try again or contact your Internet provider and ask them why they are losing data packets.

UPDATE TECH TIPS

Follow the recommended procedure for upgrading .

DOWNLOAD OPTIONS

For each product update you may be given a choice of two download options. You may either select one Complete download of the update archive or several Partial downloads of the update archive. Select whichever option fulfills your needs and requirements.

 


If you do not have a current license then you will need to contact VAMP directly at 1-323-466-5533 or FAX 1-323-466-8564 to upgrade to the above series.

Help for Download Problems

Click here to email us